Home Quality Mark high temperature reporting tool
The Home Quality Mark (HQM) high temperature reporting tool is a reporting tool that feeds into a calculation methodology to identify a home’s threshold temperature. This has been developed by BRE solely for use within the foundation route of the Temperature issue of the HQM assessment.
The intention of this tool and accompanying calculation methodology is to support the offering of capped credits to homes whose circumstances make them less likely to be at risk of overheating during summer months, where full dynamic thermal analysis is not completed.
It assesses and scores the building on key factors that affect overheating risk on a whole house basis, and should not be treated as a detailed tool to identify the presence or absence of localised overheating.
The identified threshold temperature for the home uses data from Standard Assessment Procedure (SAP) outputs and additional bolt-on inputs relating to the following topics:
- Surroundings.
- Provision of mechanical ventilation.
- Capacity for natural ventilation.
- Solar gains.
- Heat gains from communal heating.
- User factors.
The calculation methodology to determine the threshold temperature is described in the HQM Temperature supporting document.
Please note: this tool and accompanying calculation methodology will produce an estimated output founded on basic information inputs. To establish the overheating risk of a home, BRE Global would always recommend completing full dynamic thermal modelling in accordance with best practice.
Ref Home Quality Mark One, Technical Manual SD239, England, Scotland & Wales, published by BRE in 2018. http://www.homequalitymark.com/standard
[edit] Related articles on Designing Buildings Wiki
- BRE articles.
- BREEAM.
- Building Research Establishment.
- Heat stress.
- Home quality mark.
- Human comfort in buildings.
- Overheating - assessment protocol.
- Overheating in residential properties.
- Overheating.
- Preventing overheating.
- Standard Assessment Procedure.
- Thermal comfort.
- Thermal indices.
- Urban heat island
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
ECA's public affairs priorities
Member consultation opens to shape priorities for 2027 to 2030.
Dutyholder responsibilities from 1 July 2026.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.